# Makefile.in generated by automake 1.10.2 from Makefile.am.
# rdft/scalar/r2cb/Makefile.  Generated from Makefile.in by configure.

# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.



# This Makefile.am specifies a set of codelets, efficient transforms
# of small sizes, that are used as building blocks (kernels) by FFTW
# to build up large transforms, as well as the options for generating
# and compiling them.

# You can customize FFTW for special needs, e.g. to handle certain
# sizes more efficiently, by adding new codelets to the lists of those
# included by default.  If you change the list of codelets, any new
# ones you added will be automatically generated when you run the
# bootstrap script (see "Generating your own code" in the FFTW
# manual).

# -*- makefile -*-
# This file contains special make rules to generate codelets.
# Most of this file requires GNU make .


pkgdatadir = $(datadir)/fftw
pkglibdir = $(libdir)/fftw
pkgincludedir = $(includedir)/fftw
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = i386-apple-darwin9.6.0
host_triplet = i386-apple-darwin9.6.0
DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
	$(top_srcdir)/support/Makefile.codelets
subdir = rdft/scalar/r2cb
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/m4/acx_mpi.m4 \
	$(top_srcdir)/m4/acx_pthread.m4 \
	$(top_srcdir)/m4/ax_cc_maxopt.m4 \
	$(top_srcdir)/m4/ax_check_compiler_flags.m4 \
	$(top_srcdir)/m4/ax_compiler_vendor.m4 \
	$(top_srcdir)/m4/ax_gcc_aligns_stack.m4 \
	$(top_srcdir)/m4/ax_gcc_archflag.m4 \
	$(top_srcdir)/m4/ax_gcc_version.m4 \
	$(top_srcdir)/m4/ax_gcc_x86_cpuid.m4 \
	$(top_srcdir)/m4/ax_openmp.m4 $(top_srcdir)/m4/libtool.m4 \
	$(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
	$(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
	$(top_srcdir)/m4/ocaml.m4 $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
	$(ACLOCAL_M4)
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = $(top_builddir)/config.h
CONFIG_CLEAN_FILES =
LTLIBRARIES = $(noinst_LTLIBRARIES)
librdft_scalar_r2cb_la_LIBADD =
am__objects_1 = r2cb_2.lo r2cb_3.lo r2cb_4.lo r2cb_5.lo r2cb_6.lo \
	r2cb_7.lo r2cb_8.lo r2cb_9.lo r2cb_10.lo r2cb_11.lo r2cb_12.lo \
	r2cb_13.lo r2cb_14.lo r2cb_15.lo r2cb_16.lo r2cb_32.lo \
	r2cb_64.lo r2cb_128.lo r2cb_20.lo r2cb_25.lo
am__objects_2 = hb_2.lo hb_3.lo hb_4.lo hb_5.lo hb_6.lo hb_7.lo \
	hb_8.lo hb_9.lo hb_10.lo hb_12.lo hb_15.lo hb_16.lo hb_32.lo \
	hb_64.lo hb_20.lo hb_25.lo
am__objects_3 = hb2_4.lo hb2_8.lo hb2_16.lo hb2_32.lo hb2_5.lo \
	hb2_20.lo hb2_25.lo
am__objects_4 = r2cbIII_2.lo r2cbIII_3.lo r2cbIII_4.lo r2cbIII_5.lo \
	r2cbIII_6.lo r2cbIII_7.lo r2cbIII_8.lo r2cbIII_9.lo \
	r2cbIII_10.lo r2cbIII_12.lo r2cbIII_15.lo r2cbIII_16.lo \
	r2cbIII_32.lo r2cbIII_64.lo r2cbIII_20.lo r2cbIII_25.lo
am__objects_5 = hc2cb_2.lo hc2cb_4.lo hc2cb_6.lo hc2cb_8.lo \
	hc2cb_10.lo hc2cb_12.lo hc2cb_16.lo hc2cb_32.lo hc2cb_20.lo
am__objects_6 = hc2cb2_4.lo hc2cb2_8.lo hc2cb2_16.lo hc2cb2_32.lo \
	hc2cb2_20.lo
am__objects_7 = hc2cbdft_2.lo hc2cbdft_4.lo hc2cbdft_6.lo \
	hc2cbdft_8.lo hc2cbdft_10.lo hc2cbdft_12.lo hc2cbdft_16.lo \
	hc2cbdft_32.lo hc2cbdft_20.lo
am__objects_8 = hc2cbdft2_4.lo hc2cbdft2_8.lo hc2cbdft2_16.lo \
	hc2cbdft2_32.lo hc2cbdft2_20.lo
am__objects_9 = $(am__objects_1) $(am__objects_2) $(am__objects_3) \
	$(am__objects_4) $(am__objects_5) $(am__objects_6) \
	$(am__objects_7) $(am__objects_8)
am__objects_10 = codlist.lo
am__objects_11 = $(am__objects_9) $(am__objects_10)
am_librdft_scalar_r2cb_la_OBJECTS = $(am__objects_11)
librdft_scalar_r2cb_la_OBJECTS = $(am_librdft_scalar_r2cb_la_OBJECTS)
DEFAULT_INCLUDES = -I. -I$(top_builddir)
depcomp = $(SHELL) $(top_srcdir)/depcomp
am__depfiles_maybe = depfiles
CCLD = $(CC)
LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
	--mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \
	$(LDFLAGS) -o $@
SOURCES = $(librdft_scalar_r2cb_la_SOURCES)
DIST_SOURCES = $(librdft_scalar_r2cb_la_SOURCES)
ETAGS = etags
CTAGS = ctags
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = ${SHELL} /Users/stp/Code/CSL_Libs/fftw-3.2.1/missing --run aclocal-1.10
ALLOCA = 
AMTAR = ${SHELL} /Users/stp/Code/CSL_Libs/fftw-3.2.1/missing --run tar
AR = ar
AS = as
AUTOCONF = ${SHELL} /Users/stp/Code/CSL_Libs/fftw-3.2.1/missing --run autoconf
AUTOHEADER = ${SHELL} /Users/stp/Code/CSL_Libs/fftw-3.2.1/missing --run autoheader
AUTOMAKE = ${SHELL} /Users/stp/Code/CSL_Libs/fftw-3.2.1/missing --run automake-1.10
AWK = awk
CC = gcc -std=gnu99
CCDEPMODE = depmode=gcc3
CFLAGS = -O3 -fomit-frame-pointer -malign-double -fstrict-aliasing -ffast-math -march=pentium3
CODELET_OPTIM = -O -fno-schedule-insns -fno-web -fno-loop-optimize --param inline-unit-growth=1000 --param large-function-growth=1000
CPP = gcc -std=gnu99 -E
CPPFLAGS = 
CYGPATH_W = echo
DEFS = -DHAVE_CONFIG_H
DEPDIR = .deps
DLLTOOL = dlltool
DSYMUTIL = dsymutil
DUMPBIN = 
ECHO_C = \c
ECHO_N = 
ECHO_T = 
EGREP = /usr/bin/grep -E
EXEEXT = 
F77 = gfortran
FFLAGS = -g -O2
FGREP = /usr/bin/grep -F
FLIBS =  -L/usr/local/lib/gcc/i686-apple-darwin8/4.2.3 -L/usr/local/lib/gcc/i686-apple-darwin8/4.2.3/../../.. -lm -lgfortranbegin -lgfortran
GREP = /usr/bin/grep
INSTALL = /usr/bin/install -c
INSTALLED_OCAMLC = /usr/local/bin/ocamlc
INSTALL_DATA = ${INSTALL} -m 644
INSTALL_PROGRAM = ${INSTALL}
INSTALL_SCRIPT = ${INSTALL}
INSTALL_STRIP_PROGRAM = $(install_sh) -c -s
LD = /usr/bin/ld
LDFLAGS = 
LIBOBJS = 
LIBS = -lm 
LIBTOOL = $(SHELL) $(top_builddir)/libtool
LIPO = lipo
LN_S = ln -s
LTLIBOBJS = 
MAINT = #
MAKEINFO = ${SHELL} /Users/stp/Code/CSL_Libs/fftw-3.2.1/missing --run makeinfo
MKDIR_P = ../../.././install-sh -c -d
MPICC = 
MPILIBS = 
MPIRUN = 
NM = /usr/bin/nm -p
NMEDIT = nmedit
OBJDUMP = objdump
OBJEXT = o
OCAMLC = 
OCAMLCFLAGS = 
OCAMLDEFS = 
OCAMLDEP = 
OCAMLLDFLAGS = 
OCAMLOPT = 
OCAMLOPTCFLAGS = 
OPENMP_CFLAGS = 
OTOOL = otool
OTOOL64 = :
PACKAGE = fftw
PACKAGE_BUGREPORT = fftw@fftw.org
PACKAGE_NAME = fftw
PACKAGE_STRING = fftw 3.2.1
PACKAGE_TARNAME = fftw
PACKAGE_VERSION = 3.2.1
PATH_SEPARATOR = :
POW_LIB = 
PRECISION = s
PREC_SUFFIX = f
PRTDIAG = 
PTHREAD_CC = 
PTHREAD_CFLAGS = 
PTHREAD_LIBS = 
RANLIB = ranlib
SED = /usr/bin/sed
SET_MAKE = 
SHARED_VERSION_INFO = 5:3:2
SHELL = /bin/sh
SIMD_CFLAGS = 
STRIP = strip
TARGET_OCAMLBIN = /usr/local/bin
TARGET_OCAMLLIB = /usr/local/lib/fftw
TARGET_OCAMLRUN = /usr/local/bin/ocamlrun
THREADLIBS = 
VERSION = 3.2.1
abs_builddir = /Users/stp/Code/CSL_Libs/fftw-3.2.1/rdft/scalar/r2cb
abs_srcdir = /Users/stp/Code/CSL_Libs/fftw-3.2.1/rdft/scalar/r2cb
abs_top_builddir = /Users/stp/Code/CSL_Libs/fftw-3.2.1
abs_top_srcdir = /Users/stp/Code/CSL_Libs/fftw-3.2.1
ac_ct_CC = gcc
ac_ct_DUMPBIN = 
ac_ct_F77 = gfortran
acx_pthread_config = 
am__include = include
am__leading_dot = .
am__quote = 
am__tar = ${AMTAR} chof - "$$tardir"
am__untar = ${AMTAR} xf -
bindir = ${exec_prefix}/bin
build = i386-apple-darwin9.6.0
build_alias = 
build_cpu = i386
build_os = darwin9.6.0
build_vendor = apple
builddir = .
datadir = ${datarootdir}
datarootdir = ${prefix}/share
docdir = ${datarootdir}/doc/${PACKAGE_TARNAME}
dvidir = ${docdir}
exec_prefix = ${prefix}
host = i386-apple-darwin9.6.0
host_alias = 
host_cpu = i386
host_os = darwin9.6.0
host_vendor = apple
htmldir = ${docdir}
includedir = ${prefix}/include
infodir = ${datarootdir}/info
install_sh = $(SHELL) /Users/stp/Code/CSL_Libs/fftw-3.2.1/install-sh
libdir = ${exec_prefix}/lib
libexecdir = ${exec_prefix}/libexec
localedir = ${datarootdir}/locale
localstatedir = ${prefix}/var
lt_ECHO = /bin/echo
mandir = ${datarootdir}/man
mkdir_p = $(top_builddir)/./install-sh -c -d
oldincludedir = /usr/include
pdfdir = ${docdir}
prefix = /usr/local
program_transform_name = s,x,x,
psdir = ${docdir}
sbindir = ${exec_prefix}/sbin
sharedstatedir = ${prefix}/com
srcdir = .
sysconfdir = ${prefix}/etc
target_alias = 
top_build_prefix = ../../../
top_builddir = ../../..
top_srcdir = ../../..

###########################################################################
AM_CPPFLAGS = -I$(top_srcdir)/kernel -I$(top_srcdir)/rdft	\
-I$(top_srcdir)/rdft/scalar

noinst_LTLIBRARIES = librdft_scalar_r2cb.la

###########################################################################
# r2cb_<n> is a hard-coded complex-to-real FFT of size <n> (base cases
# of real-output FFT recursion)
R2CB = r2cb_2.c r2cb_3.c r2cb_4.c r2cb_5.c r2cb_6.c r2cb_7.c r2cb_8.c	\
r2cb_9.c r2cb_10.c r2cb_11.c r2cb_12.c r2cb_13.c r2cb_14.c r2cb_15.c	\
r2cb_16.c r2cb_32.c r2cb_64.c r2cb_128.c r2cb_20.c r2cb_25.c

# r2cb_30.c r2cb_40.c r2cb_50.c

###########################################################################
# hb_<r> is a "twiddle" FFT of size <r>, implementing a radix-r DIF
# step for a real-output FFT.  Every hb codelet must have a
# corresponding r2cbIII codelet (see below)!
HB = hb_2.c hb_3.c hb_4.c hb_5.c hb_6.c hb_7.c hb_8.c hb_9.c	\
hb_10.c hb_12.c hb_15.c hb_16.c hb_32.c hb_64.c \
hb_20.c hb_25.c # hb_30.c hb_40.c hb_50.c


# like hb, but generates part of its trig table on the fly (good for large n)
HB2 = hb2_4.c hb2_8.c hb2_16.c hb2_32.c \
hb2_5.c hb2_20.c hb2_25.c


# an r2cb transform where the output is shifted by half a sample (input
# is multiplied by a phase).  This is needed as part of the DIF recursion;
# every hb_<r> or hb2_<r> codelet should have a corresponding r2cbIII_<r>
R2CBIII = r2cbIII_2.c r2cbIII_3.c r2cbIII_4.c r2cbIII_5.c r2cbIII_6.c	\
r2cbIII_7.c r2cbIII_8.c r2cbIII_9.c r2cbIII_10.c r2cbIII_12.c		\
r2cbIII_15.c r2cbIII_16.c r2cbIII_32.c r2cbIII_64.c \
r2cbIII_20.c r2cbIII_25.c # r2cbIII_30.c r2cbIII_40.c r2cbIII_50.c


###########################################################################
# hc2cb_<r> is a "twiddle" FFT of size <r>, implementing a radix-r DIF
# step for a real-input FFT with rdft2-style output.  <r> must be even.
HC2CB = hc2cb_2.c hc2cb_4.c hc2cb_6.c hc2cb_8.c hc2cb_10.c hc2cb_12.c	\
hc2cb_16.c hc2cb_32.c \
hc2cb_20.c # hc2cb_30.c

HC2CBDFT = hc2cbdft_2.c hc2cbdft_4.c hc2cbdft_6.c hc2cbdft_8.c	\
hc2cbdft_10.c hc2cbdft_12.c hc2cbdft_16.c hc2cbdft_32.c \
hc2cbdft_20.c # hc2cbdft_30.c


# like hc2cb, but generates part of its trig table on the fly (good
# for large n)
HC2CB2 = hc2cb2_4.c hc2cb2_8.c hc2cb2_16.c hc2cb2_32.c \
hc2cb2_20.c # hc2cb2_30.c

HC2CBDFT2 = hc2cbdft2_4.c hc2cbdft2_8.c hc2cbdft2_16.c hc2cbdft2_32.c \
hc2cbdft2_20.c # hc2cbdft2_30.c


###########################################################################
ALL_CODELETS = $(R2CB) $(HB) $(HB2) $(R2CBIII) $(HC2CB) $(HC2CB2)	\
$(HC2CBDFT) $(HC2CBDFT2)

BUILT_SOURCES = $(ALL_CODELETS) $(CODLIST)
librdft_scalar_r2cb_la_SOURCES = $(BUILT_SOURCES)
SOLVTAB_NAME = X(solvtab_rdft_r2cb)
COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) $(CODELET_OPTIM)

LTCOMPILE = $(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) \
	$(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
	$(AM_CFLAGS) $(CFLAGS) $(CODELET_OPTIM)

CODLIST = codlist.c
CODELET_NAME = codelet_
#INDENT = indent -kr -cs -i5 -l800 -fca -nfc1 -sc -sob -cli4 -TR -Tplanner -TV
#TWOVERS = sh ${top_srcdir}/support/twovers.sh
#GENFFTDIR = ${top_builddir}/genfft
#GEN_NOTW = ${GENFFTDIR}/gen_notw
#GEN_NOTW_C = ${GENFFTDIR}/gen_notw_c
#GEN_TWIDDLE = ${GENFFTDIR}/gen_twiddle
#GEN_TWIDDLE_C = ${GENFFTDIR}/gen_twiddle_c
#GEN_TWIDSQ = ${GENFFTDIR}/gen_twidsq
#GEN_TWIDSQ_C = ${GENFFTDIR}/gen_twidsq_c
#GEN_R2CF = ${GENFFTDIR}/gen_r2cf
#GEN_R2CB = ${GENFFTDIR}/gen_r2cb
#GEN_HC2HC = ${GENFFTDIR}/gen_hc2hc
#GEN_HC2C = ${GENFFTDIR}/gen_hc2c
#GEN_HC2CDFT = ${GENFFTDIR}/gen_hc2cdft
#GEN_HC2CDFT_C = ${GENFFTDIR}/gen_hc2cdft_c
#GEN_R2R = ${GENFFTDIR}/gen_r2r
#PRELUDE_DFT = ${top_srcdir}/support/codelet_prelude.dft
#PRELUDE_RDFT = ${top_srcdir}/support/codelet_prelude.rdft
#ADD_DATE = sed -e s/@DATE@/"`date`"/
#COPYRIGHT = ${top_srcdir}/COPYRIGHT
#CODELET_DEPS = $(COPYRIGHT) $(PRELUDE) 
#PRELUDE_COMMANDS_DFT = cat $(COPYRIGHT) $(PRELUDE_DFT)
#PRELUDE_COMMANDS_RDFT = cat $(COPYRIGHT) $(PRELUDE_RDFT)
#FLAGS_COMMON = -compact -variables 4
#DFT_FLAGS_COMMON = $(FLAGS_COMMON) -pipeline-latency 4
#RDFT_FLAGS_COMMON = $(FLAGS_COMMON) -pipeline-latency 4

# special rules for regenerating codelets.
#FLAGS_R2CB = $(RDFT_FLAGS_COMMON) -sign 1
#FLAGS_HB = $(RDFT_FLAGS_COMMON) -sign 1
#FLAGS_HB2 = $(RDFT_FLAGS_COMMON) -sign 1 -twiddle-log3 -precompute-twiddles
#FLAGS_HC2CB = $(RDFT_FLAGS_COMMON) -sign 1
#FLAGS_HC2CB2 = $(RDFT_FLAGS_COMMON) -sign 1 -twiddle-log3 -precompute-twiddles
#FLAGS_R2CBIII = $(RDFT_FLAGS_COMMON) -sign 1
all: $(BUILT_SOURCES)
	$(MAKE) $(AM_MAKEFLAGS) all-am

.SUFFIXES:
.SUFFIXES: .c .lo .o .obj
$(srcdir)/Makefile.in: # $(srcdir)/Makefile.am $(top_srcdir)/support/Makefile.codelets $(am__configure_deps)
	@for dep in $?; do \
	  case '$(am__configure_deps)' in \
	    *$$dep*) \
	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
	        && { if test -f $@; then exit 0; else break; fi; }; \
	      exit 1;; \
	  esac; \
	done; \
	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu  rdft/scalar/r2cb/Makefile'; \
	cd $(top_srcdir) && \
	  $(AUTOMAKE) --gnu  rdft/scalar/r2cb/Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
	@case '$?' in \
	  *config.status*) \
	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
	  *) \
	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
	esac;

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

$(top_srcdir)/configure: # $(am__configure_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4): # $(am__aclocal_m4_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

clean-noinstLTLIBRARIES:
	-test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES)
	@list='$(noinst_LTLIBRARIES)'; for p in $$list; do \
	  dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \
	  test "$$dir" != "$$p" || dir=.; \
	  echo "rm -f \"$${dir}/so_locations\""; \
	  rm -f "$${dir}/so_locations"; \
	done
librdft_scalar_r2cb.la: $(librdft_scalar_r2cb_la_OBJECTS) $(librdft_scalar_r2cb_la_DEPENDENCIES) 
	$(LINK)  $(librdft_scalar_r2cb_la_OBJECTS) $(librdft_scalar_r2cb_la_LIBADD) $(LIBS)

mostlyclean-compile:
	-rm -f *.$(OBJEXT)

distclean-compile:
	-rm -f *.tab.c

include ./$(DEPDIR)/codlist.Plo
include ./$(DEPDIR)/hb2_16.Plo
include ./$(DEPDIR)/hb2_20.Plo
include ./$(DEPDIR)/hb2_25.Plo
include ./$(DEPDIR)/hb2_32.Plo
include ./$(DEPDIR)/hb2_4.Plo
include ./$(DEPDIR)/hb2_5.Plo
include ./$(DEPDIR)/hb2_8.Plo
include ./$(DEPDIR)/hb_10.Plo
include ./$(DEPDIR)/hb_12.Plo
include ./$(DEPDIR)/hb_15.Plo
include ./$(DEPDIR)/hb_16.Plo
include ./$(DEPDIR)/hb_2.Plo
include ./$(DEPDIR)/hb_20.Plo
include ./$(DEPDIR)/hb_25.Plo
include ./$(DEPDIR)/hb_3.Plo
include ./$(DEPDIR)/hb_32.Plo
include ./$(DEPDIR)/hb_4.Plo
include ./$(DEPDIR)/hb_5.Plo
include ./$(DEPDIR)/hb_6.Plo
include ./$(DEPDIR)/hb_64.Plo
include ./$(DEPDIR)/hb_7.Plo
include ./$(DEPDIR)/hb_8.Plo
include ./$(DEPDIR)/hb_9.Plo
include ./$(DEPDIR)/hc2cb2_16.Plo
include ./$(DEPDIR)/hc2cb2_20.Plo
include ./$(DEPDIR)/hc2cb2_32.Plo
include ./$(DEPDIR)/hc2cb2_4.Plo
include ./$(DEPDIR)/hc2cb2_8.Plo
include ./$(DEPDIR)/hc2cb_10.Plo
include ./$(DEPDIR)/hc2cb_12.Plo
include ./$(DEPDIR)/hc2cb_16.Plo
include ./$(DEPDIR)/hc2cb_2.Plo
include ./$(DEPDIR)/hc2cb_20.Plo
include ./$(DEPDIR)/hc2cb_32.Plo
include ./$(DEPDIR)/hc2cb_4.Plo
include ./$(DEPDIR)/hc2cb_6.Plo
include ./$(DEPDIR)/hc2cb_8.Plo
include ./$(DEPDIR)/hc2cbdft2_16.Plo
include ./$(DEPDIR)/hc2cbdft2_20.Plo
include ./$(DEPDIR)/hc2cbdft2_32.Plo
include ./$(DEPDIR)/hc2cbdft2_4.Plo
include ./$(DEPDIR)/hc2cbdft2_8.Plo
include ./$(DEPDIR)/hc2cbdft_10.Plo
include ./$(DEPDIR)/hc2cbdft_12.Plo
include ./$(DEPDIR)/hc2cbdft_16.Plo
include ./$(DEPDIR)/hc2cbdft_2.Plo
include ./$(DEPDIR)/hc2cbdft_20.Plo
include ./$(DEPDIR)/hc2cbdft_32.Plo
include ./$(DEPDIR)/hc2cbdft_4.Plo
include ./$(DEPDIR)/hc2cbdft_6.Plo
include ./$(DEPDIR)/hc2cbdft_8.Plo
include ./$(DEPDIR)/r2cbIII_10.Plo
include ./$(DEPDIR)/r2cbIII_12.Plo
include ./$(DEPDIR)/r2cbIII_15.Plo
include ./$(DEPDIR)/r2cbIII_16.Plo
include ./$(DEPDIR)/r2cbIII_2.Plo
include ./$(DEPDIR)/r2cbIII_20.Plo
include ./$(DEPDIR)/r2cbIII_25.Plo
include ./$(DEPDIR)/r2cbIII_3.Plo
include ./$(DEPDIR)/r2cbIII_32.Plo
include ./$(DEPDIR)/r2cbIII_4.Plo
include ./$(DEPDIR)/r2cbIII_5.Plo
include ./$(DEPDIR)/r2cbIII_6.Plo
include ./$(DEPDIR)/r2cbIII_64.Plo
include ./$(DEPDIR)/r2cbIII_7.Plo
include ./$(DEPDIR)/r2cbIII_8.Plo
include ./$(DEPDIR)/r2cbIII_9.Plo
include ./$(DEPDIR)/r2cb_10.Plo
include ./$(DEPDIR)/r2cb_11.Plo
include ./$(DEPDIR)/r2cb_12.Plo
include ./$(DEPDIR)/r2cb_128.Plo
include ./$(DEPDIR)/r2cb_13.Plo
include ./$(DEPDIR)/r2cb_14.Plo
include ./$(DEPDIR)/r2cb_15.Plo
include ./$(DEPDIR)/r2cb_16.Plo
include ./$(DEPDIR)/r2cb_2.Plo
include ./$(DEPDIR)/r2cb_20.Plo
include ./$(DEPDIR)/r2cb_25.Plo
include ./$(DEPDIR)/r2cb_3.Plo
include ./$(DEPDIR)/r2cb_32.Plo
include ./$(DEPDIR)/r2cb_4.Plo
include ./$(DEPDIR)/r2cb_5.Plo
include ./$(DEPDIR)/r2cb_6.Plo
include ./$(DEPDIR)/r2cb_64.Plo
include ./$(DEPDIR)/r2cb_7.Plo
include ./$(DEPDIR)/r2cb_8.Plo
include ./$(DEPDIR)/r2cb_9.Plo

.c.o:
	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
#	source='$<' object='$@' libtool=no \
#	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \
#	$(COMPILE) -c $<

.c.obj:
	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
#	source='$<' object='$@' libtool=no \
#	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \
#	$(COMPILE) -c `$(CYGPATH_W) '$<'`

.c.lo:
	$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
#	source='$<' object='$@' libtool=yes \
#	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \
#	$(LTCOMPILE) -c -o $@ $<

mostlyclean-libtool:
	-rm -f *.lo

clean-libtool:
	-rm -rf .libs _libs

ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
	      END { if (nonempty) { for (i in files) print i; }; }'`; \
	mkid -fID $$unique
tags: TAGS

TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
		$(TAGS_FILES) $(LISP)
	tags=; \
	here=`pwd`; \
	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
	      END { if (nonempty) { for (i in files) print i; }; }'`; \
	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
	  test -n "$$unique" || unique=$$empty_fix; \
	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	    $$tags $$unique; \
	fi
ctags: CTAGS
CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
		$(TAGS_FILES) $(LISP)
	tags=; \
	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
	      END { if (nonempty) { for (i in files) print i; }; }'`; \
	test -z "$(CTAGS_ARGS)$$tags$$unique" \
	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
	     $$tags $$unique

GTAGS:
	here=`$(am__cd) $(top_builddir) && pwd` \
	  && cd $(top_srcdir) \
	  && gtags -i $(GTAGS_ARGS) $$here

distclean-tags:
	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags

distdir: $(DISTFILES)
	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	list='$(DISTFILES)'; \
	  dist_files=`for file in $$list; do echo $$file; done | \
	  sed -e "s|^$$srcdirstrip/||;t" \
	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
	case $$dist_files in \
	  */*) $(MKDIR_P) `echo "$$dist_files" | \
			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
			   sort -u` ;; \
	esac; \
	for file in $$dist_files; do \
	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
	  if test -d $$d/$$file; then \
	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
	    fi; \
	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
	  else \
	    test -f $(distdir)/$$file \
	    || cp -p $$d/$$file $(distdir)/$$file \
	    || exit 1; \
	  fi; \
	done
check-am: all-am
check: $(BUILT_SOURCES)
	$(MAKE) $(AM_MAKEFLAGS) check-am
all-am: Makefile $(LTLIBRARIES)
installdirs:
install: $(BUILT_SOURCES)
	$(MAKE) $(AM_MAKEFLAGS) install-am
install-exec: install-exec-am
install-data: install-data-am
uninstall: uninstall-am

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-am
install-strip:
	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	  `test -z '$(STRIP)' || \
	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:

clean-generic:

distclean-generic:
	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
	-test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES)
clean: clean-am

clean-am: clean-generic clean-libtool clean-noinstLTLIBRARIES \
	mostlyclean-am

distclean: distclean-am
	-rm -rf ./$(DEPDIR)
	-rm -f Makefile
distclean-am: clean-am distclean-compile distclean-generic \
	distclean-tags

dvi: dvi-am

dvi-am:

html: html-am

info: info-am

info-am:

install-data-am:

install-dvi: install-dvi-am

install-exec-am:

install-html: install-html-am

install-info: install-info-am

install-man:

install-pdf: install-pdf-am

install-ps: install-ps-am

installcheck-am:

maintainer-clean: maintainer-clean-am
	-rm -rf ./$(DEPDIR)
	-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic \
	maintainer-clean-local

mostlyclean: mostlyclean-am

mostlyclean-am: mostlyclean-compile mostlyclean-generic \
	mostlyclean-libtool

pdf: pdf-am

pdf-am:

ps: ps-am

ps-am:

uninstall-am:

.MAKE: install-am install-strip

.PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \
	clean-libtool clean-noinstLTLIBRARIES ctags distclean \
	distclean-compile distclean-generic distclean-libtool \
	distclean-tags distdir dvi dvi-am html html-am info info-am \
	install install-am install-data install-data-am install-dvi \
	install-dvi-am install-exec install-exec-am install-html \
	install-html-am install-info install-info-am install-man \
	install-pdf install-pdf-am install-ps install-ps-am \
	install-strip installcheck installcheck-am installdirs \
	maintainer-clean maintainer-clean-generic \
	maintainer-clean-local mostlyclean mostlyclean-compile \
	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
	tags uninstall uninstall-am


# rule to build codlist
$(CODLIST): Makefile
	(								\
	echo "#include \"ifftw.h\"";					\
	echo;								\
	for i in $(ALL_CODELETS) NIL; do				\
	   if test "$$i" != NIL; then					\
	     j=`basename $$i | sed -e 's/[.][cS]$$//g'`;		\
             echo "extern void X($(CODELET_NAME)$$j)(planner *);";	\
           fi								\
	done;								\
	echo;								\
	echo;								\
	echo "extern const solvtab $(SOLVTAB_NAME);";		        \
	echo "const solvtab $(SOLVTAB_NAME) = {";		        \
	for i in $(ALL_CODELETS) NIL; do				\
	   if test "$$i" != NIL; then					\
	     j=`basename $$i | sed -e 's/[.][cS]$$//g'`;		\
	     echo "   SOLVTAB(X($(CODELET_NAME)$$j)),";			\
	   fi								\
	done;								\
	echo "   SOLVTAB_END";						\
	echo "};";							\
	) >$@

# only delete codlist.c in maintainer-mode, since it is included in the dist
# FIXME: is there a way to delete in 'make clean' only when builddir != srcdir?
maintainer-clean-local:
	rm -f $(CODLIST)

# cancel the hideous builtin rules that cause an infinite loop
#%: %.o
#%: %.s
#%: %.c
#%: %.S

#r2cb_%.c:  $(CODELET_DEPS) $(GEN_R2CB)
#	($(PRELUDE_COMMANDS_RDFT); $(TWOVERS) $(GEN_R2CB) $(FLAGS_R2CB) -n $* -name r2cb_$* -include "r2cb.h") | $(ADD_DATE) | $(INDENT) >$@

#hb_%.c:  $(CODELET_DEPS) $(GEN_HC2HC)
#	($(PRELUDE_COMMANDS_RDFT); $(TWOVERS) $(GEN_HC2HC) $(FLAGS_HB) -n $* -dif -name hb_$* -include "hb.h") | $(ADD_DATE) | $(INDENT) >$@

#hb2_%.c:  $(CODELET_DEPS) $(GEN_HC2HC)
#	($(PRELUDE_COMMANDS_RDFT); $(TWOVERS) $(GEN_HC2HC) $(FLAGS_HB2) -n $* -dif -name hb2_$* -include "hb.h") | $(ADD_DATE) | $(INDENT) >$@

#r2cbIII_%.c:  $(CODELET_DEPS) $(GEN_R2CB)
#	($(PRELUDE_COMMANDS_RDFT); $(TWOVERS) $(GEN_R2CB) $(FLAGS_R2CB) -n $* -name r2cbIII_$* -dft-III -include "r2cbIII.h") | $(ADD_DATE) | $(INDENT) >$@

#hc2cb_%.c:  $(CODELET_DEPS) $(GEN_HC2C)
#	($(PRELUDE_COMMANDS_RDFT); $(TWOVERS) $(GEN_HC2C) $(FLAGS_HC2CB) -n $* -dif -name hc2cb_$* -include "hc2cb.h") | $(ADD_DATE) | $(INDENT) >$@

#hc2cb2_%.c:  $(CODELET_DEPS) $(GEN_HC2C)
#	($(PRELUDE_COMMANDS_RDFT); $(TWOVERS) $(GEN_HC2C) $(FLAGS_HC2CB2) -n $* -dif -name hc2cb2_$* -include "hc2cb.h") | $(ADD_DATE) | $(INDENT) >$@

#hc2cbdft_%.c:  $(CODELET_DEPS) $(GEN_HC2CDFT)
#	($(PRELUDE_COMMANDS_RDFT); $(TWOVERS) $(GEN_HC2CDFT) $(FLAGS_HC2CB) -n $* -dif -name hc2cbdft_$* -include "hc2cb.h") | $(ADD_DATE) | $(INDENT) >$@

#hc2cbdft2_%.c:  $(CODELET_DEPS) $(GEN_HC2CDFT)
#	($(PRELUDE_COMMANDS_RDFT); $(TWOVERS) $(GEN_HC2CDFT) $(FLAGS_HC2CB) -n $* -dif -name hc2cbdft2_$* -include "hc2cb.h") | $(ADD_DATE) | $(INDENT) >$@
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
